VERTICAL ORE MILL FOR SALE
Grinding Machine : Vertical Ore Mill
Different with vertical coal mill, this is specifically designed for ore grinding. Similarly, the ore mill is also of vertical structure. In lots of ores mining, this mill is widely used for minerals grinding.
VERTICAL ORE MILL WORKING PRINCIPLE
The motor drives the grinding table through decelerator. The materials fall down the center of grinding table from feed opening. At the same time, hot air comes into the mill from the air inlet. Due to the centrifugal force, materials move to the edge of the grinding table. The materials are pulverized by the roller when by pass of the groove on the grinding table. The crushed materials are brought up by vane high-speed airstream, the larger particles fall down to the grinding table for regrinding. When the materials in the airstream pass the separator on the top of the mill , the coarse powder fall down the grinding table for regrinding under the function of rotation rotor. The fine powder comes out with the airstream,and is gathered by the dust catcher. The materials content with moisture will be dried when they meet the hot airstream. Through adjusting the temperature of the hot airstream, it can meet different material’s requirement, and also through adjusting seperator, it can reach proper fineness of materials.
ORE MILL SPECIFICATIONS
| Model | LM130K | LM150K | LM170K | LM190K | LM220K | LM240K | |
| Turnplate diameter (mm) | 1300 | 1500 | 1700 | 1900 | 2200 | 2400 | |
| Capacity (t/h) | 10~30 | 13~40 | 18~57 | 23~72 | 36~114 | 41~128 | |
| Final product size | μm | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 |
| mesh | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | |
| Final product water percentage | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | |
| Max. input size (mm) | 38 | 40 | 42 | 45 | 50 | 55 | |
| Best water percentage of raw material | 4% | 4% | 4% | 4% | 4% | 4% | |
| Drying needed if water percentage is more than | 15% | 15% | 15% | 15% | 15% | 15% | |
| Input wind temperature (℃) | 350 | 350 | 350 | 350 | 350 | 350 | |
| Output wind temperature (℃) | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | |
| Main motor power (KW) | 185~220 | 250~280 | 355~400 | 450~500 | 710~800 | 800~900 | |
| Overall dimension | L mm | 3500 | 4200 | 4700 | 8500 | 10200 | 11700 |
| W mm | 3400 | 3900 | 4500 | 5600 | 6700 | 7700 | |
| H mm | 5800 | 7100 | 8300 | 8800 | 10600 | 12200 | |
| Weight (t) | 48 | 75 | 90 | 100 | 125 | 160 | |
Note: This specification is just reference, any changes are subject to Vertical Ore Mill.
Wheather you need a comprehensive online designing plan, or implementation with an existing plan, we are on it.
